Altera Stratix IV GX FPGA - Manual (Page 36)

6–12 Chapter 6: Board Test System
Using the Board Test System
Stratix IV GX FPGA Development Kit User Guide March 2014 Altera Corporation
■ Math —Selects data generated from a simple math function within the FPGA
fabric.
Read and Write Control
The Read and write control control specifies the type of transactions to analyze. The
following transaction types are available for analysis:
■ Write then read —Selects read and write transactions for analysis.
■ Read only —Selects read transactions for analysis.
■ Write only —Selects write transactions for analysis.
The QDRII+ Tab
The QDRII+ tab allows you to read and write the QDR II+ memory on your board
and independently test each QDR II+ port.
Figure 6–6 shows the QDRII+ tab.
The following sections describe the controls on the QDRII+ tab.
Figure 6–6. The QDRII+ Tab