Altera Arria II GX FPGA Development Board, 6G Edition - Manual (Page 33)

Chapter 2: Board Components 2–25
General User Input/Output
© July 2010 Altera Corporation Arria II GX FPGA Development Board, 6G Edition Reference Manual
Table 2–26 lists the user-defined LED schematic signal names and their corresponding
Arria II GX pin numbers.
Table 2–27 lists the user-defined LED component reference and the manufacturing
information.
HSMC User-Defined LEDs
The HSMC port A and B have two LEDs located nearby. There are no board-specific
functions for the HSMC LEDs. However, the LEDs are labeled TX and RX, and are
intended to display data flow to and from the connected HSMC daughtercards. The
LEDs are driven by the Arria II GX device.
Table 2–28 lists the HSMC user-defined LED schematic signal names and their
corresponding Arria II GX pin numbers.
Table 2–26. User-defined LED Schematic Signal Names and Functions
Board Reference Description
Schematic
Signal Name I/O Standard
Arria II GX Device
Pin Number
D10 User-defined LEDs.
Driving a logic 0 on the I/O
port turns the LED ON. Driving
a logic 1 on the I/O port turns
the LED OFF.
USR_LED0
2.5-V
G1
D9 USR_LED1 J4
D8 USR_LED2 J5
D7 USR_LED3 R5
Table 2–27. User-defined LED Component Reference and Manufacturing Information
Board Reference
Device
Description Manufacturer
Manufacturer
Part Number Manufacturer Website
D7 to D10 Green LEDs Lite-On LTST-C170KGKT www.us.liteon.com/opto.index.html
Table 2–28. HSMC User-defined LED Schematic Signal Names and Functions
Board
Reference Description
Schematic
Signal Name I/O Standard
Arria II GX Device
Pin Number
D5 User-defined LEDs.
Labeled TX for HSMC port A.
HSMA_TX_LED
2.5-V
C29
D4 User-defined LEDs.
Labeled RX for HSMC port A.
HSMA_RX_LED N5
D3 User-defined LEDs.
Labeled TX for HSMC port B.
HSMB_TX_LED AE24
D2 User-defined LEDs.
Labeled RX for HSMC port B.
HSMB_RX_LED AF23