Mains input, Dc link and pfc – Altera Multiaxis Motor Control Board User Manual
Page 6
Page 6
Functional Description
Multiaxis Motor Control Board
February 2014
Altera Corporation
Mains Input
The Multiaxis Motor Control Board filters the mains input (
Figure 3
) and then splits to
the DC link and the 22-V power supply. Both power supplies incorporate PFC. The
Multiaxis Motor Control Board works with mains input voltages of 85 to 264 VAC, 50
or 60 Hz. The mains input includes an EMI filter.
DC Link and PFC
To provide unity power factor with very low-level harmonic distortion in line current,
an Emerson AIF04ZPFC-01L module produces the 400-V DC link voltage (
Figure 4
).
The PFC works over all typical line voltages used worldwide.
Figure 3. Mains Input Filtering
Figure 4. DC Link Voltage PFC Supply
PFC
Bus
Converter
EMI
Filter
~
~
+
_
400 V at 4 A
22 V at 1A
90 - 240 VAC
50/60 Hz
Emerson
400-V PFC
Module
Isolated
SD-ADC
20 MSPS
3.3 V
3.3 V
400 V at 4 A
Emerson
400-V PFC
Module
Isolated
SD-ADC
20 MSPS