Rear gate (station wagon) – Subaru 2004 Legacy User Manual

Page 138

Advertising
background image

2-31

Keys and doors

CONTINUED

Rear gate (Station wagon)

1) Lock
2) Unlock

To unlock the rear gate, insert the key in the keyhole

and turn it clockwise. To lock the rear gate, insert the

key in the keyhole and turn it counterclockwise. If your

vehicle is equipped with power door locking switches,

the rear gate can also be locked and unlocked through

use of the power door locking switches. Refer to “Pow-

er door locking switches” section in this chapter.

To open the rear gate, first unlock the rear gate lock

then pull the outside handle up.

Then, hold the rear gate and raise it as high as it will

go.

To close the rear gate, lower it slowly and push down

firmly until the latch engages.

The rear gate can be lowered easily if you pull down

on the recessed grip.

y

To prevent dangerous exhaust gas from en-

tering the vehicle, always keep the rear gate

closed while driving.
y

Do not attempt to shut the rear gate while

holding the recessed grip. Also avoid closing

1

2

UB2022BB

UG2512BA

Advertising
This manual is related to the following products: