Subaru 2004 Legacy - Manual (Page 317)

7-44
Starting and operating
At this time, the “ ” indicator light is illuminated in
the combination meter.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while
driving with the cruise control activated. Simply de-
press the accelerator pedal to accelerate the vehicle.
When the accelerator pedal is released, the vehicle
will return to and maintain the previous cruising speed.
„ To temporarily cancel the cruise con-
trol
There are four ways to cancel the cruise control tem-
porarily:
y Depress the brake pedal.
y Pull the control lever in the “CANCEL” direction. (if
so equipped)
y
Depress the clutch pedal (manual transmission ve-
hicles only).
y
Shift the selector lever into the “N” position (auto-
matic transmission vehicles only).
The “ ” indicator light in the combination meter
goes off when the cruise control is cancelled.
To resume the cruise control after it has been tempo-
rarily canceled and with vehicle speed of about 20
mph (32 km/h) or more, push the control lever upward
in the “ACCEL, RESUME” direction to return to the
original cruising speed automatically.
The “ ” indicator light in the combination meter
will automatically come on at this time.
„ To turn off the cruise control
There are two ways to turn off the cruise control:
y
Push the main switch again.
y Turn the ignition switch to the “ACC” position (but
only when the vehicle is completely stopped).
UB4010KA