Engine oil – Subaru 2004 Legacy User Manual
Page 412
Advertising
11-11
2Maintenance and service
– CONTINUED –
Engine oil
Checking the oil level
Check the engine oil level at each fuel stop.
1. Park the vehicle on a level surface and stop the en-
gine.
2. Pull out the dipstick, wipe it clean, and insert it
again.
3. Be sure the dipstick is correctly inserted until it
stops with the graphic symbol
on its top appear-
ing as shown in the illustration.
1) Notch (except 3.0L)
2) Upper level
3) Lower level
4. Pull out the dipstick again and check the oil level on
it. If it is below the lower level, add oil to bring the level
up to the upper level.
Use only engine oil with the recommended
grade and viscosity.
If you check the oil level just after stopping the engine,
UBB004JA
1
2
3
UGB082BB
Advertising
This manual is related to the following products: