Subaru 2004 Legacy User Manual

Page 473

Advertising
background image

11-72

2Maintenance and service

For covers on the trunk wall:

1) Brake/tail light bulb
2) Rear turn signal light bulb

Unlatch the cover by moving the knob upward and

open the cover.

3. Remove the bulb socket from the light assembly by

turning it counterclockwise.

4. Remove the bulb from the socket.

Rear turn signal light: Remove the bulb from the

socket by pushing it and turning it counterclockwise.

Others: Pull the bulb out of the socket.

5. Install a new bulb in the socket.

6. Set the bulb socket into the rear combination light

assembly and turn it clockwise until it locks.

7. Close the cover and latch the clock.

T Station wagon

V Brake/tail and rear turn signal light bulbs
It may be difficult to replace the bulbs. It is recom-

mended that you have the bulbs replaced by your

SUBARU dealer.

1) Service holes

1. Remove the light bulb replacement service hole

covers at two places by prying the edge of the cover

with a regular screwdriver.

1

2

UBB035BB

1

UBB021BB

Advertising
This manual is related to the following products: