Subaru 2004 Legacy User Manual

Page 308

Advertising
background image

7-35

Starting and operating

CONTINUED

y

Whenever suspension components, steering

components, or an axle are removed from a ve-

hicle equipped with VDC, have an authorized

SUBARU dealer perform an inspection of that

system.
y

The following precautions should be ob-

served in order to ensure that the VDC system

is operating properly:

– All four wheels should be fitted with tires of

the same size, type, and brand. Furthermore,

the amount of wear should be the same for all

four tires.

– Keep the tire pressure at the proper level as

shown on the placard attached to the vehi-

cle’s door pillar.

– Use only the special temporary spare tire to

replace a flat tire. With a temporary spare tire,

the effectiveness of the VDC system is re-

duced and this should be taken into account

when driving with vehicle.

In the event of wheelspin and/or skidding on a slippery

road surface and/or during cornering and/or an eva-

sive maneuver, the VDC system adjusts the engine’s

output and the wheels’ respective braking forces to

help maintain traction and directional control.

y

Traction Control Function

The traction control function is designed to prevent

spinning of the driving wheels on slippery road surfac-

es, thereby helping to maintain traction and directional

control. Activation of this function is shown by steady

illumination of the VDC operation indicator light.

y

Skid Suppression Function

The skid suppression function is designed to help

maintain directional stability by suppressing the

wheels’ tendency to slide sideways during steering op-

erations. Activation of this function is shown by flash-

ing of the VDC operation indicator light.

NOTE

y

Slight twitching of the brake pedal may be felt

when the VDC-system operates; a small degree of

vehicle or steering wheel shaking may also be no-

ticed in this situation. These are normal character-

istics of VDC operation and are no cause for

alarm.
y

When driving off immediately after starting the

engine, a short-lived operation noise may be no-

ticed coming from the engine compartment. This

noise is generated as a result of a check being per-

formed on the VDC system and is normal.
y

Depending on the timing of activation of the

brakes, certain situations may occur just after

Advertising
This manual is related to the following products: