Subaru 2004 Legacy - Manual (Page 454)

11-53
2Maintenance and service
– CONTINUED –
„ Replacement wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Stopper
2. Remove the wiper blade assembly by holding its
pivot area and pushing it in the direction shown by the
arrow while depressing the wiper blade stopper.
3. Install the wiper blade assembly to the wiper arm.
Make sure that it locks in place.
4. Lower the wiper arm.
„ Replacement wiper blade rubber
T Windshield wiper blade rubber
1) Metal support
1. Grasp the locked end of the blade rubber assembly
and pull it firmly until the stoppers on the rubber are
free of the metal support.
1
HSB058CB
1
HSB059BB