Audible reminders -22 – NISSAN 2009 Frontier User Manual

Page 110

Advertising
background image

Vehicle Dynamic Control

(VDC) off indicator light (if so
equipped)

This indicator light comes on when the Vehicle

Dynamic Control off switch is pushed to OFF, the

transfer case is in the 4LO position (

model), or when the Vehicle Dynamic Control

system is not functioning properly. This indicates

the Vehicle Dynamic Control system is not oper-

ating.
Push the Vehicle Dynamic Control off switch

again or restart the engine and the system will

operate normally. See “Vehicle Dynamic Control

(VDC) system” in the “Starting and driving” sec-

tion of this manual.
The Vehicle Dynamic Control light also comes on

when you turn the ignition key to the ON position.

The light will turn off after about 2 seconds if the

system is operational. If the light stays on or

comes on along with the SLIP indicator light

while you are driving, have the Vehicle Dynamic

Control system checked by a NISSAN dealer.
If the battery is removed or discharged, the Ve-

hicle Dynamic Control system is disabled and the

VDC indicator light will not turn off after 2 sec-

onds when the ignition switch is turned to the ON

position. To reset the system, you must perform

the reset procedure. Refer to “Vehicle Dynamic

Control (VDC) system” in the “Starting and driv-

ing” section of this manual.
If the light does not go off after performing the

reset procedure, have the traction control system

checked by a NISSAN dealer.
While the Vehicle Dynamic Control system is

operating, you might feel slight vibration or hear

the system working when starting the vehicle or

accelerating, but this is normal.
The VDC system will be disabled and the VDC

light will illuminate when the electronic locking

rear differential (E-lock) system switch (if so

equipped) is turned on and the E-lock system is

engaged. If the E-lock system disengages or the

switch is turned off, the VDC system will be

enabled and the VDC light will turn off.

AUDIBLE REMINDERS
Brake pad wear warning

The disc brake pads have audible wear warnings.

When a disc brake pad requires replacement, it

makes a high pitched scraping sound when the

vehicle is in motion, whether or not the brake

pedal is depressed. Have the brakes checked as

soon as possible if the warning sound is heard.

Key reminder chime

A chime sounds if the driver’s door is opened

while the key is left in the ignition switch. Remove

the key and take it with you when leaving the

vehicle.

Light reminder chime

With the ignition switch placed in the OFF posi-

tion, a chime sounds when the driver’s door is

opened if the headlights or parking lights are on.
Turn the headlight control switch off before leav-

ing the vehicle.

2-22

Instruments and controls

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising