Steering wheel switch for audio control, If so equipped) -36 antenna -36 – NISSAN 2009 Frontier User Manual

Page 196

Advertising
background image

1.

Volume control switch

2.

Phone operation switch

3.

POWER on and MODE select switch

4.

Tuning switch

STEERING WHEEL SWITCH FOR

AUDIO CONTROL (if so equipped)

The audio system can be operated using the

controls on the steering wheel.

POWER on/off switch

With the ignition switch placed in the ACC or ON

position, push the POWER switch to turn the

audio system on or off.

If you have the Type B switch, with the ignition

switch placed in the ACC or ON position, push

the MODE switch to turn the audio system on.

“MODE” select switch

Push the mode select switch to change the

modes:
PRESET A

→ PRESET B → PRESET C → CD*

→ AUX** → PRESET A
*This mode is only available when a CD is loaded.
**This mode is only available when a compatible

auxiliary device is plugged into the AUX jack.

Volume control switch

Push the volume control switch up or down to

increase or decrease the volume.

Tuning

Memory change (radio):

Push the tuning switch (

or

) for less

than 1.5 seconds to change to the next or previ-

ous preset.
Seek tuning (radio):

Push the tuning switch (

or

) for

more than 1.5 seconds to seek the next or previ-

ous radio station.

Next/Previous track (CD):

Push the tuning switch

or

for less

than 1.5 seconds to return to the beginning of the

present track or skip to the next track. Push

several times to skip back or skip through tracks.
Change disc (CD) (if so equipped):

Push the SEEK tuning switch

or

for

more than 1.5 seconds to change the playing

disc up or down.

ANTENNA

The antenna cannot be shortened, but can be

removed. When you need to remove the antenna,

turn the antenna rod counterclockwise.
To install the antenna rod, turn the antenna clock-

wise. Tighten the antenna rod to specification

using a suitable tool such as an open-end

wrench. The antenna rod tightening specification

is 3.4 – 3.6 N·m (30 – 32 in-lb). Do not use pliers

to tighten the antenna as they can leave marks on

the antenna surface. The antenna rod cannot be

hand tightened to the proper specification.

CAUTION

Always properly tighten the antenna rod

during installation or the antenna rod may

break during vehicle operation.

Type B

LHA1087

4-36

Heater, air conditioner, audio and phone systems

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising