Transfer case shifting procedures -23 – NISSAN 2009 Frontier User Manual

Page 235

Advertising
background image

CAUTION

Do not drive the vehicle in the 4H or 4LO

position on dry hard surface roads. Driv-

ing on dry, hard surfaces in 4H or 4LO

may cause unnecessary noise, tire wear

and increased fuel consumption.
If the 4WD warning light turns on when

you are driving on dry hard surface

roads:

– in the 4H position, shift the 4WD shift

switch to 2WD.

– in the 4LO position for automatic

transmission vehicles, stop the ve-

hicle and shift the transmission se-

lector to the N position with the

brake pedal depressed and shift the

4WD shift switch to 2WD.

– in the 4LO position for manual trans-

mission vehicles, stop the vehicle

and shift the transmission shift lever

to the N position with the clutch

pedal depressed and shift the 4WD

shift switch to 2WD.

If the warning light is still on after the

above operation, have your vehicle

checked by a NISSAN dealer as soon as

possible.

TRANSFER CASE SHIFTING

PROCEDURES

The part time 4WD system provides 3 positions

(2WD, 4H and 4LO), so you can select the

desired drive mode according to the driving con-

ditions.

Starting and driving

5-23

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—barbara

Advertising