NISSAN 2009 Frontier User Manual

Page 43

Advertising
background image

Top tether anchor point locations

Anchor points are located in the following loca-

tions:

● On the back of the front passenger seat

(King cab only).

● On the floor between the jump seat belt

buckles in the center of the vehicle (King cab

only).

● Under the rear window behind the rear

bench seat (Crew cab only).

If you have any questions when installing a

top tether strap child restraint on the front

passenger’s seat, rear passenger’s side

jump seat or rear bench seat, consult your

NISSAN dealer for details.

Installing top tether strap

First, secure the child restraint with the LATCH

system (rear bench outboard seating positions

on Crew cab only) or the seat belt, as applicable.

Front passenger seat (King cab models
only)

1. Top tether strap
2. Top tether strap anchor point

For the front passenger seat in the King cab only,

install the top tether strap as follows:

1. Adjust the head restraint to its highest posi-

tion.

2. Route the top tether strap between the head

restraint and the top of the seatback.

3. Secure the tether strap to the tether anchor

point on the seatback.

4. Tighten the tether strap according to the

manufacturer’s instructions to remove any

slack.

For best child restraint fit, see the child restraint

installation instructions in this section and the

child restraint manufacturer’s instructions.

LRS0572

Safety—Seats, seat belts and supplemental restraint system

1-25

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/24/08—debbie

Advertising