NISSAN 2009 Frontier User Manual

Page 236

Advertising
background image

2WD or 4WD shift procedure:

4WD Shift

Switch Position

Wheels Driven

Indicator Light

Use Conditions

4WD Shift Procedure

4WD shift

Transfer 4LO position

2WD

Rear wheels

For driving on dry, paved

roads (Economy drive) or

state dynamometer I/M

testing

Move the 4WD switch.

2WD <—> 4H

4WD shift indicator light will indicate transfer shift position en-

gaged.

4H

4 wheels

For driving on rocky, sandy

or snow-covered roads

Neutral

*1

May blink

Neutral disengages the

automatic transmission

mechanical parking lock,

which will allow the vehicle

to roll. Do not leave the

transfer shift position in

Neutral.*2

1. Stop the vehicle.

2. For automatic transmission vehicles: Shift the shift selector

to the (N) position with the brake pedal depressed.

For manual transmission vehicles: Shift the shift selector to

the (N) position with the clutch depressed.

3. For automatic transmission vehicles: Depress and turn the

4WD shift switch to 4LO or 4H with the brake pedal de-

pressed.

For manual transmission vehicles: Depress and turn the

4WD switch to 4LO or 4H with the clutch pedal depressed.

THE TRANSFER CASE DOES NOT ENGAGE BETWEEN 4H

AND 4LO (OR 4LO TO 4H) UNLESS YOU HAVE FIRST

STOPPED THE VEHICLE, DEPRESSED THE BRAKE PEDAL

AND MOVED THE SHIFT SELECTOR TO NEUTRAL FOR AU-

TOMATIC TRANSMISSION VEHICLES. FOR MANUAL TRANS-

MISSION VEHICLES YOU MUST MOVE THE SHIFT SELEC-

TOR TO NEUTRAL. *3

4LO

4 wheels

Illuminated

For use when maximum

power and traction is re-

quired (for example: on

steep grades or rocky,

sandy, muddy roads)

*1: Before moving the shift selector from neutral, wait until the 4LO indicator light stays on steady. This indicates that the 4WD shift procedure is completed

and the transfer gear is correctly set in the 4LO position. If the vehicle is shifted into gear before the indicator is on steady, the transfer gear may grind,

not engage correctly or stay in the neutral position.

- If the 4WD warning light illuminates, perform the following procedure to return the transfer case to correct operating condition.
1. Turn off the engine by turning the ignition switch

ЉOFFЉ.

5-24

Starting and driving

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising