Driving the vehicle -13, Automatic transmission (if so equipped) -13 – NISSAN 2009 Frontier User Manual

Page 225

Advertising
background image

AUTOMATIC TRANSMISSION (if so

equipped)

WARNING

Do not depress the accelerator pedal

while shifting from P (Park) or N (Neu-

tral) to R (Reverse), D (Drive), 3, 2 or 1.

Always depress the brake pedal until

shifting is completed. Failure to do so

could cause you to lose control and

have an accident.

Cold engine idle speed is high, so use

caution when shifting into a forward or

reverse gear before the engine has

warmed up.

Never shift to P (Park) or R (Reverse)

while the vehicle is moving. This could

cause an accident.

CAUTION

When stopping the vehicle on an uphill

grade, do not hold the vehicle by de-

pressing the accelerator pedal. The foot

brake should be used for this purpose.

Do not downshift abruptly on slippery

roads. This may cause a loss of control.

The automatic transmission in your vehicle is

electronically controlled to produce maximum

power and smooth operation.
The recommended operating procedures for this

transmission are shown on the following pages.

Follow these procedures for maximum vehicle

performance and driving enjoyment.

Starting the vehicle

1. After starting the engine, fully depress the

foot brake pedal before moving the shift

selector out of the P (Park) position.

2. Keep the foot brake pedal depressed and

move the shift selector into a driving gear.

3. Release the foot brake, then gradually start

the vehicle in motion.

The automatic transmission is designed so

the foot brake pedal MUST be depressed

before shifting from P (Park) to any drive

position while the ignition switch is in the

ON position.
The shift selector cannot be moved out of P

(Park) and into any of the other gear posi-

tions if the ignition key is turned to the

LOCK, OFF or ACC position or if the key is

removed.

To move the shift selector:

: Push the button while depressing the

brake pedal

: Push the button to shift

: Shift without depressing brake pedal

Shifting

After starting the engine, fully depress the brake

pedal and move the shift selector out of the P

(Park) position.

LSD0151

DRIVING THE VEHICLE

Starting and driving

5-13

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising