Heater operation -4 – NISSAN 2009 Frontier User Manual

Page 164

Advertising
background image

● for maximum cooling when using the air con-

ditioner.

OFF position:
Push the air recirculation button

again to

turn air recirculation off. The indicator light on
the

button will turn off. Outside air is drawn

into the passenger compartment and distributed

through the selected outlet.
Use the off position for normal heater or air con-

ditioner operation.

Air conditioner button (if so

equipped)

The button is provided only on vehicles equipped

with an air conditioner.
Start the engine, turn the fan control dial to the
desired (1 - 4) position and push the

button to turn on the air conditioner. The indicator

light comes on when the air conditioner is oper-

ating. To turn off the air conditioner, push
the

button again.

The air conditioner cooling function oper-
ates only when the engine is running.

Rear window defroster switch (if so

equipped)

For more information about the rear window de-

froster switch, see “Rear window and outside

mirror defroster switch” in the “Instruments and

controls” section of this manual.

HEATER OPERATION
Heating

This mode is used to direct heated air to the foot

outlets. Some air also flows from the defrost

outlets.

1. Push the

button to the OFF position

for normal heating. The indicator light on
the

button will go off.

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

Ventilation

This mode directs outside air to the side and

center vent.

1. Push the

button to the OFF position.

The indicator light on the

button will

go off.

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Defrosting or defogging

This mode directs the air to the defrost outlets to

defrost/defog the windows.

1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● To quickly remove ice or fog from the win-

dows, turn the fan control dial to 4 and the

temperature control lever to the full HOT

position.

4-4

Heater, air conditioner, audio and phone systems

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising