Clutch interlock (clutch start) switch, If so equipped) -35 – NISSAN 2009 Frontier User Manual

Page 123

Advertising
background image

Use the E-Lock system only when free-

ing a stuck vehicle. Try the 4LO position

before using the E-Lock system. Never

use the E-Lock system on a slippery

road surface such as snow or ice sur-

face. Using the E-Lock system when

driving in these road conditions may

cause unexpected movement of the ve-

hicle during engine braking, accelerat-

ing or turning, which may result in an

accident and serious personal injury.

CAUTION

After using the E-Lock system, turn the

switch OFF to prevent possible damage

to driveline components from extended

use.

Do not drive over 12 MPH (20 km/h)

when the system is engaged. Doing so

could result in possible damage to the

driveline.

Do not turn on the E-lock system while

the tires are spinning. Doing so could

damage drivetrain components.

WARNING

Pay special attention to your surround-

ings when using the clutch interlock

switch. The vehicle will move forward or

backward according to the gear selected.

The clutch interlock (clutch start) switch allows

for starting the engine without depressing the

clutch pedal. This feature helps you restart the

engine if it stops under difficult conditions. (For

example, the engine stops on a steep hill and a

slight movement forward or backward might be

dangerous.)

To use the clutch interlock switch:

1. Set the parking brake.
2. Depress the brake pedal with your right foot.
3. Place the shift selector in the 1 position to

move forward, or R to move backward.

4. Place your left foot on the brake pedal and

release the parking brake.

5. Turn the ignition switch to the ON position.
6. Press and release the clutch interlock

switch. The CANCEL light on the switch will

illuminate.

7. Turn the ignition to the START position to

start the engine and, at the same time, de-

press the accelerator pedal with your right

foot. As the vehicle begins to move, take

your left foot off the brake. Once the engine

has started, the clutch interlock switch

CANCEL light shuts off. Do not use the

interlock switch to start the engine under

normal driving conditions.

WIC0817

CLUTCH INTERLOCK (clutch start)

SWITCH (if so equipped)

Instruments and controls

2-35

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising