Heater operation -11 – NISSAN 2009 Frontier User Manual

Page 171

Advertising
background image

— Air flows from center and side

ventilators.

— Air flows from center and side

ventilators and foot outlets.

— Air flows mainly from foot

outlets.

— Air flows from defroster out-

lets and foot outlets.

— Air flows mainly from defroster

outlets.

Temperature control dial

The temperature control dial allows you to adjust

the temperature of the outlet air. To lower the

temperature, turn the dial to the left. To increase

the temperature, turn the dial to the right.

Air recirculation button

ON position (Indicator light on):
Interior air is recirculated inside the vehicle.

Press the

button to the on position when:

● driving on a dusty road.
● to prevent traffic fumes from entering pas-

senger compartment.

● for maximum cooling when using the air con-

ditioner.

OFF position (Indicator light off):

Outside air is drawn into the passenger compart-

ment and distributed through the selected outlet.
Use the off position for normal heater or air con-

ditioner operation.

Air conditioner button

Start the engine, turn the fan control dial to the
desired position and push the

button to

turn on the air conditioner. The indicator light

comes on when the air conditioner is operating.
To turn off the air conditioner, push the

button again.
The air conditioner cooling function oper-

ates only when the engine is running.

Rear window defroster switch (if so

equipped)

For more information about the rear window de-

froster switch, see “Rear window and outside

mirror defroster switch” in the “Instruments and

controls” section of this manual.

HEATER OPERATION

Heating

This mode is used to direct heated air to the foot

outlets. Some air also flows from the defrost

outlets.

1. Press the

button to the OFF position

for normal heating. The indicator light on
the

button will go off.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

Ventilation

This mode directs outside air to the side and

center ventilators.

1. Press the

button to the OFF position.

The indicator light on the

button will

go off.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

Heater, air conditioner, audio and phone systems

4-11

REVIEW COPY—

2009 08+ Truck/Frontier (fro)

Owners Manual—USA_English (nna)
05/27/08—debbie

Advertising