Setting | security, User controls, Security – Optoma X307USTi User Manual
Page 30: Change password
30
English
User Controls
Setting |
Security
Security
On: Choose “On” to use security verification when turning on
`
`
the projector.
Off: Choose “Off” to be able to switch on the projector without
`
`
password verification.
Change Password
First time:
`
`
Press
y
the ► button to set the password.
The password has to be 6 digits.
y
Use the
y
▲ or ▼ on the remote control to select your new
password on the screen and then press ► to confirm it.
Change Password:
`
`
Use the
y
▲ or ▼ on the remote control to enter your current
password on the screen and then press ► to confirm it.
Enter a new password (6 digits in length) then press
y
“Enter”
to confirm it.
Enter the new password again and press
y
“Enter” to confirm
it.
If the incorrect password is entered for 3 times, the projector
`
`
will automatically shut down.
If you have forgotten your password, please contact your local
`
`
office for support.
Select
Enter
Exit
Securtiy
Security
Change Password
On
Password default
value is “000000”
(first time).
Select
Enter
Exit
Securtiy
Enter Security Code (6 digits)
Incorrect security code Re-enter again