Optoma X307USTi - Manual (Page 35)

35
English
User Controls
3D
3D
Auto: When a HDMI1.4a 3D timing identification signal is ` `
detected, the 3D image is selected automatically.
Choose “Off” to disable 3D function.
` `
Choose “On” to enable 3D function. ` `
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame
Sequential” and “Field Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D
glasses in the1080p @ 24 frame packing.
“Frame Sequential” 
is supported the
DLP Link 3D input
signals from VGA /
HDMI connector.
“Frame Sequential”

/ “Field Sequen-
tial” are supported
the HQFS 3D
input signals from
Composite/S-video
connector connec-
tor.
“Frame Packing” /

“Side-by-Side(Half)”
/ “Top and Bottom”
are supported from
HDMI 1.4a 3D input
signals.
3D
3D
3D Invert
3D Format
1080p@24 Off
Off
Select Enter Exit