Optoma X307USTi - Manual (Page 32)

32
English
User Controls
Options
Logo
Use this function to set the desired startup screen. If changes are
made they will take effect the next time the projector is powered
on.
Default: The default startup screen. ` `
User: Use stored picture from “Logo Capture” function. ` `
Logo Capture
Press ► button to capture an image of the picture currently
displayed on screen.
Screen capture in progress...
Please wait...
Auto Source
On: The projector will search for other signals if the current ` `
input signal is lost.
Off: The projector will only search current input connection.
` `
Input
Press ► button to enable/disable input sources. The projector will
not search for inputs that are not selected.
For successful logo 
capture, please
ensure that the
onscreen image
does not exceed
the projector’s
native resolution.
(WXGA:1280x800).
“Logo Capture” is

not available when
3D is enabled.
Before active

this function, it is
recommended that
“Aspect Ratio” is set
to the “Auto”.
Options
Logo
Logo Capture
Auto Source
Input
Auto Power Off (min)
Lamp Settings
Dynamic Black
High Altitude
Filters Remind (Hour)
Information Default
On
On
Off
Select Enter Exit