Optoma X307USTi - Manual (Page 45)

45
English
Appendices
If the projector is still not projecting the whole image, -
you will also need to change the monitor display you are
using. Refer to the following steps.
Select the “Change” under the “Monitor” tab. 1.
Click on “Show all devices”. Next, select “Standard 2.
monitor types” under the SP box; choose the
resolution mode you need under the “Models” box.
Verify that the resolution setting of the monitor display
3.
is lower than or equal to 1080p.
If you are using a Notebook: y
First, follow the steps above to adjust resolution of the -
computer.
Press the toggle output settings. example: [Fn]+[F4]
-
Acer  [Fn]+[F5]
Asus  [Fn]+[F8]
Dell  [Fn]+[F8]
Gateway  [Fn]+[F4]
Mac Apple:
System Preference  Display  Arrangement  Mirror
display
IBM/Lenovo  [Fn]+[F7]
HP/Compaq  [Fn]+[F4]
NEC  [Fn]+[F3]
Toshiba  [Fn]+[F5]
If you experience difficulty changing resolutions or your y
monitor freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not
displaying your presentation
Some Notebook PCs may deactivate their own screens when a sec-
ond display device is in use. Each has a different way to be reactivat-
ed. Refer to your computer’s documentation for detailed information.
Image is unstable or flickering
Adjust the “Phase” to correct it. Refer to the “Screen” section for ` `
more information.
Change the monitor color setting from your computer.
` `