Appendices, Troubleshooting – Optoma X307USTi User Manual
Page 44
44
English
Appendices
No image appears on-screen
Ensure all the cables and power connections are correctly and
`
`
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
`
`
Check if the projection lamp has been securely installed.
`
`
Ensure that the “Blank” feature is not turned on.
`
`
Partial, scrolling or incorrectly displayed image
Press “Auto Sync” on the remote control.
`
`
If you are using a PC:
y
For Windows 95, 98, 2000, XP, Windows 7:
-
Open the “My Computer” icon, the “Control Panel”
1.
folder, and then double click on the “Display” icon.
Select the “Settings” tab.
2.
Verify that your display resolution setting is lower than
3.
or equal to 1080p.
Click on the “Enter”.
4.
For Windows Vista:
-
From the “My Computer” icon, open the “Control
1.
Panel” folder, and double click the “Appearance and
Personalization”
Select “Personalization”.
2.
Click “Adjust screen resolution” to display “Display
3.
Settings”. Click on the “Enter”.
Troubleshooting
If you experience a problem with your projector,
please refer to the following information. If a prob-
lem persists, please contact your local reseller or
service center.