Atlona AT-HD88M-SR User Manual
Page 16
Advertising
14
Method C: Software Control through RS-232 or USB port
Software Control Menu
1. Scan button:
Serial Port Scan:
Press Scan button, the machine will scan the all com port and show them.
Select the RS232 serial port connected to the machine. And set device ID 255 is for all device.
Only the same device id or 255 can get the command you sent.
Press OK. Get the new status from the machine you select.
HDMI Input
Source Selection
Mapping Area
HDMI Output
Port Selection
Mapping Area
Status Indicator
Advertising