Atlona AT-HD88M-SR - Manual (Page 18)

16
First select input source. Then select the output ports which you want to send the
video and audio from this source. When you select the input source, the source will
change to gray. When you select the output port one by one, the selected output
port will change to gray.
The linking line will change to yellow.
Group setting
First select output ports one by one. Then select the input source. The selected
output ports change the setting at the same time.
By using Terminal:
Baud rate: 9600
Data length: 8bit
Parity check: No
Stop bit:
1
Command Set:
COMMAND ACTION COMMAND ACTION COMMAND ACTION
ST
System Status
C5
Output C select Input 5
F3
Output F select Input 3
VR Firmware Version C6 Output C select Input 6 F4 Output F select Input 4
A1 Output A select Input 1 C7 Output C select Input 7 F5 Output F select Input 5
A2 Output A select Input 2 C8 Output C select Input 8 F6 Output F select Input 6
A3
Output A select Input 3
D1
Output D select Input 1
F7
Output F select Input 7
A4 Output A select Input 4 D2 Output D select Input 2 F8 Output F select Input 8
A5 Output A select Input 5 D3 Output D select Input 3 G1 Output G select Input 1
A6 Output A select Input 6 D4 Output D select Input 4 G2 Output G select Input 2
A7 Output A select Input 7 D5 Output D select Input 5 G3 Output G select Input 3
A8 Output A select Input 8 D6 Output D select Input 6 G4 Output G select Input 4
B1 Output B select Input 1 D7 Output D select Input 7 G5 Output G select Input 5
B2 Output B select Input 2 D8 Output D select Input 8 G6 Output G select Input 6
B3 Output B select Input 3 E1 Output E select Input 1 G7 Output G select Input 7
B4 Output B select Input 4 E2 Output E select Input 2 G8 Output G select Input 8
B5 Output B select Input 5 E3 Output E select Input 3 H1 Output H select Input 1
B6 Output B select Input 6 E4 Output E select Input 4 H2 Output H select Input 2
B7 Output B select Input 7 E5 Output E select Input 5 H3 Output H select Input 3
B8 Output B select Input 8 E6 Output E select Input 6 H4 Output H select Input 4
C1 Output C select Input 1 E7 Output E select Input 7 H5 Output H select Input 5
C2
Output C select Input 2
E8
Output E select Input 8
H6
Output H select Input 6
C3 Output C select Input 3 F1 Output F select Input 1 H7 Output H select Input 7
C4 Output C select Input 4 F2 Output F select Input 2 H8 Output H select Input 8