Atlona AT-HD88M-SR - Manual (Page 5)

3
SPECIFICATIONS
NS
Note
1. The AT-HD88M-R has been tested extensively and found that it doesn’t require external power supply. If in
rare situation you find it cannot work with the AT-HD88M-S, please use any +5V power adapter to plug in the
power jack and see if it can work. If not, please contact our technical support for further service.
2.
USB or RS-232 control must be connected either one at a time. Connecting both types of cables may cause
command confusion.
Model Name AT-HD88M-SR
Technical AT-HD88M-S AT-HD88M-R
Role of usage 8x8 true matrix / transmitter [TX] Receiver [RX]
HDMI ™ compliance HDMI ™ 1.3c
HDCP compliance Yes
Video bandwidth Single-link 225MHz [6.75Gpbs]
Video support 480i / 480p / 720p / 1080i / 1080p60 8-12bit color
Audio support Surround sound (up to 7.1ch) or stereo digital audio
HDMI
™
over UTP
transmission range
Full HD (1080p) – 35m (115ft) [CAT5e] / 40m (130ft) [CAT6]
HD (720p/1080i) – 50m (165ft) [CAT5e] / 55m (180ft) [CAT6]
HDMI ™ equalization N/A 8-level digital rotary control
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
Input 8x HDMI
™
+ 1x RS-232 + 1x USB 2x RJ-45 + 1x IR socket for IR receiver
Output 16x RJ-45 + 9x IR socket for IR blaster 1x HDMI ™
HDMI
™
Input selection
Push-in button / IR remote control /
RS-232 / USB
Push-in button / IR remote control
HDMI
™
source control Controllable via IR pass-through from IR receiver at RX to IR blaster at TX
IR remote control Electro-optical characteristics: τ = 25° / Carrier frequency: 36-40kHz
HDMI ™ connector Type A [19-pin female]
RJ-45 connector WE/SS 8P8C with 2 LED indicators [TMDS & DDC channels]
RS-232 connector DE-9 [9-pin D-sub female]
USB connector * Standard type-B [square shape]
3.5mm connector
Earphone jacks for IR blaster
[IR Main] IR control on all source devices
[IR PASS-THROUGH1~8] IR control on
individual source device
Earphone jack for IR receiver
[IR RECEIVER] Receives IR commands
from remote control
DIP switch
[SW1~SW8] 2-pin for EDID & audio mode
[SW Main] 4-pin for operation & firmware update
Mechanical AT-HD88M-S AT-HD88M-R
Enclosure Metal enclosure
Dimensions (L*W*H) 290 x 440 x 44mm [11.4” x 1’5” x 1.7”] 90 x 85 x 25mm [3.5” x 3.3” x 1”]
Weight
Model 3250g [7.2 lbs] 180g [6.3oz]
Package 7.1 kg [15.6 lbs]
Fixedness 1U rack-mount with ears Wall-mount with screws
Power supply AC Power 100-240V Not necessarily required 1
Power consumption 60 Watts [max] 1.5 Watt [max] (provided by AT-HD88M-S)
Operation temperature 0~40 °C [32~104°F]
Storage temperature -20~60 °C [-4~140°F]
Relative humidity 20~90% RH [no condensation]