BINDER MK 53 - Manual (Page 51)

MK (E2.1) 10/2014 page 51/73
14.4 Data logger kit
BINDER Data Logger Kits offer an independent long-term measuring system for temperature. They are
equipped with a keyboard and a large LCD display, alarm functions and a real-time function. Measure-
ment data are recorded in the Data Logger and can be read out after the measurement via the RS232
interface of the Data Logger. It offers a programmable measuring interval and permits storing up to 64000
measuring values. Reading out is done with the Data Logger evaluation software. You can give out a
combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Temperature range -90 °C / -130 °F up to +220 °C / 428 °F
For detailed information on installation and operation of the BINDER Data Logger, please refer
to the mounting instructions Art. No. 7001-0204 and to the original user manual of the manu-
facturer, supplied with the data logger.
14.5 Additional measuring channel for digital object temperature indicator with
flexible temperature sensor Pt 100 (option)
The object temperature display enables the determination of the actual temperature of the charging mate-
rial during the whole process. The object temperature is measured via a flexible Pt100 temperature sen-
sor and can be viewed at the display controller MB1. The sensor top protective tube of the flexible Pt 100
can be immersed into liquid substances.
W X
CONFIG HAND PGM VIEW->
09:12:24 15.12.13
TEMP
25.0
25.3
°C
OBJ-T
25.6
°C
Figure 11: Display controller MB1 MB1with object temperature display
The object temperature data is given out together with the data of the temperature controller to the RS
422 interface as a second measuring channel and can be documented by the communication software
APT-COM™ (option, chap. 14.1) developed by BINDER.
Technical data of the Pt 100 sensor:
•
Three-wire technique
• Class B (DIN EN 60751)
• Temperature range up to 320 °C
• Stainless steel protective tube 45 mm length, material no. 1.4501