Casella CEL Software for the Tuff sampling pumps - Manual (Page 24)

the Communications Port dialog (Figure 35), normally COM1 or COM2.
Figure 35 Add a Pump
3. Select the File menu and see the following options:
New This option allows pump and person details to be added to
the Directory field in the top level window
Print Setup Standard dialog
Minimise to System Tray Use this option to remove the Pump Manager button from
the Status Bar, but leave the IR link icon in the System
Tray (bottom right of the display) to show that the software
is active in background
Run on Startup Enable (Ö) this option to start Pump Manager
automatically whenever Windows is started
Exit Standard dialog
All data will be identified by the serial number of the pump from which it was
downloaded. The serial number is set at the factory and cannot be edited by the
software. However, further information can be added via a New Pump dialog, and via
the similar Pump Properties dialog obtained by right clicking on the pump name.
Downloaded results can also be identified by user (person), with details added via a
New Person dialog (Fig. 36).
Casella CEL Limited 24