Casella CEL Software for the Tuff sampling pumps - Manual (Page 27)

Figure 38 Typical Data Download Dialog.
When all data has been downloaded, the software clears the data from the pump
memory.
When any TUFF or Apex pump is actively sampling or running a program, they MUST
BE KEPT AWAY from the IR Transducer. This prevents the Transducer from trying to
empty the pump of any saved data and interrupting the current data sample.
If a pump is detected that has not been configured by the software, (is not included in
the Pump Manager Directory field), a “New Pump” message will be displayed (Fig. 35)
and the new pump added automatically to the application.
The operator should add the remaining pump properties as soon as possible. (A TUFF
Standard model will be shown as a pump with no data.)
If People have been defined, the option will be offered to select the
person who has been using the pump, or to select No Pump User.
The downloaded data is stored in the application database where it is identified by
pump, and when defined, also by person. The display is updated to include the new
data in a “sample” (run) folder that shows each time the pump was switched ON and
OFF as a separate “event” (Fig. 39)
Casella CEL Limited 27