NEXCOM VMC 3000/ 3001 - Manual (Page 28)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 12 VMC 3000/4000 Series User Manual
Chapter 1: Product Introduction
Item Function Description
1 Antenna Holes The 2 external antenna mounting holes are used to mount and connect the antenna to a WLAN module and Bluetooth
module.
2 Antenna Holes The external antenna mounting holes are used to mount and connect the antenna to a WWAN module.
3 Power Key • When the ignition is from “low” to “high”, VMC will turn on automatically.
• When the ignition is “high”, press the power button 5sec to turn on/off VMC.
• When the ignition is from “high” to “low”, VMC will turn off automatically.
• When the ignition is “low”, pressing the power button will not turn on VMC.
• When you press it for 1 second, the display will turn on/off.
4 Volume Key Audio volume can be adjusted in 10 levels using the buttons.
5 Brightness Control
Key
There are two modes for Brightness Control: Manual Mode and Auto Mode.
The Manual Mode is via brightness control key to adjust the
LCD brightness, it can be adjusted in 10 levels using the “+” or “-” buttons.
6 Light Sensor Light sensors can adjust a display’s backlight, which improves the power savings and optimizing the display’s viewability.
7 Warning Indicator When ambient temperature is over 50°C, the warning indicator will be red.
8 Function Key There are five buttons and 10 function keys on the VMC3000 series.
The first stage is F1~F5, second stage is F6~F10. When you press the shift key, the shift key will turn blue lights, the
function key will be changed to the second stage.
9 Speaker VMC3000 includes the dual speaker, the specification is 2W/ 4Ω.
10 VESA Mounting Hole There are VESA mounting hole of 75 x 75 and 100 x 100 on the rear cover.
11 U-Shaped Mounting The optional U-shaped mounting kit.