NEXCOM IFA 1610 - Manual (Page 21)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. IFA 3610/IFA 2610/IFA 1610 User Manual
Chapter 1: The System Menu
18
1.3.1 Settings
The default tab serves for the configuration of the email notification:
Email notifications
Select from a drop-down menu how to use the notification system. Available options are:
▪ notify using default email address: the default administrator e-mail address (as specified in the Installation wizard or
in step 6 of Menubar ► System ► Network configuration)
▪ notify using custom email address: an alternate e-mail address to which the notification e-mail shall be sent. In this
case, three more options must be configured, namely:
Mail sender address
The e-mail address that appear as the sender of the e-mail.
Mail recipient address
The e-mail address to which the e-mail will be delivered.
Mail smarthost
The SMTP server that will be used to send the notification e-mail.
▪ do not notify: no notifications will be sent
1.3.2 Events
This tab shows a list of all the events that can produce a notification message and allows to configure the actions to be
done when each of the events takes place. Right above the list there is a small navigation bar and a search field: The
latter can be used to filter only the relevant items.
The list contains three columns:
ID
The 8-digit ID ABBCCCCD code of the event, which is built as follows:
▪ A represents the layer number, i.e., in which system’s component the event has taken place: 1 means kernel, 2 the
system itself, 3 services, 4 configlayer, and 5 the GUI.
▪ BB is the module number
▪ CCCC is a sequential number assigned to the event
▪ D is the severity of the event, i.e., the degree of badness of the event. The lower the number, the worst the severity:
0 is a critical event, 4-5 neutral, 9 is a positive event.