AquaMAX G135VE - Manual (Page 15)

WATER SUPPLIES
15
SATURATION INDEX
The saturation index (SI)
is used as a measure of the water’s corrosive or scaling
properties.
In a corrosive water supply, the water can attack copper parts and cause them
to fail.
In a scaling water supply calcium carbonate is deposited out of the water onto
any hot metallic surface.
Where the saturation index exceeds +0.40, the water is very scaling. An
expansion control valve must be fitted on the cold water line after the non-return
valve to protect and for the Aquamax warranty to apply to the temperature
pressure relief valve and water heater cylinder.
Water which is scaling may be treated with a water softening device to reduce
the saturation index of the water.
Refer to the
Saturation Index chart on page 15.
Refer to the
cold water connection detail on page 29 for the position of the
expansion control valve.
-1.0
no
warr
anty
a
pp
li
e
s
to
a
:
te
m
p
e
ra
tu
re
p
re
s
s
u
re
r
e
li
e
f
v
a
lv
e
o
r
a
w
a
te
r
h
e
a
te
r
c
y
li
n
d
e
r
u
n
le
s
s
a
n
e
x
p
a
n
s
io
n
c
o
n
tr
o
l
v
a
lv
e
i
s
f
it
te
d
.
SATURATION INDEX (SI)
GAS STORAGE WATER HEATERS
WITHIN WARRANTY
SPECIFICATION
SATURATION INDEX
(calculated @ 80°C water temperature)
+0.4 +0.8 0
very corrosive very scaling scaling corrosive