Table 4-1, Rpm files, Installation of viewcheck – Artesyn ViewCheck on ATCA-7370 Installation and Use (April 2014) User Manual
Page 30
Installation of ViewCheck
ViewCheck on ATCA-7370 Installation and Use (6806800S48B)
30
You can install this RPM on top of the blade BBS service by using the same integration process
for integrating any customer-specific applications or services on the blade. The exact
integration process of ViewCheck RPM service varies according to the customer environment.
Using the following command, you can install the ViewCheck RPM Image:
rpm -iv --nodeps diagnostics-
<RELEASE>_<BUILD>.<DIST>.<OS>.atca7370.rpm
Using the following command, you can upgrade the ViewCheck RPM Image:
rpm -U --nodeps diagnostics-
<RELEASE>_<BUILD>.<DIST>.<OS>.atca7370.rpm
Using the following command, you can remove the ViewCheck RPM Image:
rpm -e diagnostics-<RELEASE>_<BUILD>.<DIST>.<OS>.atca7370.rpm
The following table provides details of the files that are created on the blade once the
ViewCheck RPM is installed.
No need to re-build the ViewCheck RPM Image for your environment.
Table 4-1 RPM Files
File Name
Path
Descriptions
diagcored
/opt/diagnostics/bin/
ViewCheck Core - Daemon
diagconfig.xml
diaguserconf.xml
/opt/diagnostics/etc/dia
g/
ViewCheck configuration file and user
configuration file.
diagcore
/opt/diagnostics/etc/ini
t.d/
Script to Start/Stop ViewCheck Core
libdiagintf.so
/lib64/
Interface library between ViewCheck
core daemon and BSF application.
<TestScripts>.sh
/opt/diagnostics/tools/d
iagtestscripts/
Test scripts
EmrDiag_Debug.log
/opt/diagnostics/var/log
/diag/service/
ViewCheck daemon service log