10 set-poll-interval-default, Table 5-16, Set-poll-interval – Artesyn ViewCheck on ATCA-7370 Installation and Use (April 2014) User Manual
Page 72: Commands execution
Commands Execution
ViewCheck on ATCA-7370 Installation and Use (6806800S48B)
72
<Name>monitorId</Name>
<Value>Monitor ID</Value>
</Argument>
<Argument>
<Name>pollInterval</Name>
<Value>PollInterval Value</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the set-poll-interval command arguments.
5.4.10 set-poll-interval-default
set-poll-interval-default
command is used to reset the Poll interval value to default
value of a particular monitor.
Syntax for CLI
set-poll-interval-default monitorId <Monitor ID> deviceInstance
<Dev Instance>
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>vee0-{Dev Cat}</Name>
</Object>
Table 5-16 set-poll-interval
Argument
Data Type Description
Monitor ID
Integer
Type the unique ID of the Monitor for which you want to
set the Poll interval value
Dev Instance
Enum
Use list-device-instances CLI command to get the
equivalent enumerated value of supported Device
Instance
PollInterval Value
Integer
Type the Poll interval value for the specified monitor ID