Artesyn ViewCheck on ATCA-7370 Installation and Use (April 2014) - Manual (Page 33)

Installation of ViewCheck
ViewCheck on ATCA-7370 Installation and Use (6806800S48B) 33
After the installation, the BSF binary files are installed at the /opt/ssf location.
The BSF applications can be started/stopped by passing 'start' or 'stop' to the script.
/opt/ssf/etc/config/S99SsfBsfRun.sh restart
/opt/ssf/etc/config/S99SsfBsfRun.sh <start/stop>
4.4 ViewCheck Service OS Image
The ViewCheck Service OS Image enables you to boot into ViewCheck specific OS and execute
the OOSD tests. The ViewCheck service is not completely dependent on the blade BBS
environment. For compatibility purpose, it may use the same OS or Kernel variant that are used
by the blade BBS service. For ATCA-7370, the ViewCheck service OS is created with PNE 4.x as
the OS.
The ViewCheck service OS along with the ViewCheck RPM, test suites, and test procedures are
distributed as an ISO file that contains:
 ViewCheck OS as Ram Disk image that can be Net bootable
 ViewCheck OS image can be Net bootable and installable on selected Flash Partition,
provided User Flash is available on the blade
In ATCA 7370, there is no provision for User Flash. Hence ViewCheck service OS is created as
Net bootable Ram Disk Image.
The following table provides details of the files that are distributed as part of this image once
the ViewCheck service OS is installed.
Table 4-2 ViewCheck Service OS Image Files
File Name path Remarks
diagnostics-RELEASE-
BUILD.windriver.linux.atc
a7370.gz
Net bootable Ram Disk image with
ViewCheck RPM, Orion License RPM, and
BSF services package.