Software installation and configuration, Table 2-4 plugin specific parameters (continued) – Artesyn System Management Interface Based on HPI-B 2.0(Centellis 4620/4440) User's Guide (June 2014) User Manual
Page 26
Software Installation and Configuration
System Management Interface Based on BBS HPI-B 2.0 (Centellis 4620/4440) User’s Guide (6806800P21D)
26
name
Interface name for ipmi
connection
"smi | lan"
[lan]
- connection over LAN
smi
- connection over SMI
interface
"smi" - if HPI is
running on shelf
manager
"lan" - if HPI is
running on
management
controllers other
than shelf
manager
addr
Shelf manager RMCP
address
IP address
[192.168.24.11]
NA
port
RMCP port
Port number
[623]
NA
auth_type
RMCP authentication type
"none | md2 | md5
| straight"
[none]
none
auth_level
RMCP authentication level
"admin |
operator"
[admin]
admin
username
RMCP username
Username
[""]
""
password
RMCP password
Password
[""]
""
DomainTag
Domain Tag
Domain tag
["ATCA Shelf"]
NA
sel_filename
System event log file
name
Any valid file
name
[/var/lib/bbs-
hpib/shelf_sel.db]
Commented out by default
NA
max_number_of_sel_entries
Maximum number of SEL
entries
<0…N>
[100]
Commented out by default
NA
IpmiConnectionTimeout
IPMI Connection timeout
<0…N> msecs
[1500] - 1500
milliseconds
NA
AtcaConnectionTimeout
IPMI driver/smi timeout
<0…N> msecs
[1500] - 1500
milliseconds
1000
MaxOutstanding
Maximum number of
outstanding IPMI
commands
<0…N> [10]
- 10 commands by
default. After this max is
reached, any other request is
awaited.
0
ResourcePowerOffTimeout
A timeout after which the
resource FRU Power State
will be set to initial state.
This timer is started soon
after executing the Power
Off/Power Cycle/hotswap
operations on the
resource.
<0…N>
[60000] - 60000 ms
60000
Table 2-4 Plugin Specific Parameters (continued)
Tag
Description
Allowed values
Default in Config. file
Built-in Default