Artesyn System Management Interface Based on HPI-B 2.0(Centellis 4620/4440) User's Guide (June 2014) - Manual (Page 61)

Using HPI-B
System Management Interface Based on BBS HPI-B 2.0 (Centellis 4620/4440) User’s Guide (6806800P21D) 61
4.6.7 IPMI Command Control
IPMI command control is used to execute IPMI commands on a given resource id. This control
is created for all the FRUs in the shelf. hpiipmi client application makes use of this control to
get the IPMI commands executed.
Table 4-22 HPI Restart Daemon State
SaHpiCtrlStateT Value
Type SAHPI_CTRL_TYPE_DIGITAL
StateUnion.Digital SAHPI_CTRL_STATE_PULSE_ON |
SAHPI_CTRL_STATE_OFF
Table 4-23 IPMI Command RDR
SaHpiRdrT Value
RecordId
Assigned by HPI implementation
RdrType SAHPI_CTRL_RDR
Entity
Entity path of the FRU
Ex: {ADVANCEDTCA_CHASSIS,6}{FAN_TRAY_SLOT,1}
{COOLING_UNIT,1}
RdrTypeUnion
Defined in next table
IdString MOTHPI_CTRL_NAME_BOOT_OPTION
Table 4-24 IPMI Command Control
SaHpiCtrlRecT Value
Num MOTHPI_CTRL_NUM_IPMI_COMMAND
Type SAHPI_CTRL_TYPE_OEM
OutputType SAHPI_CTRL_OEM
TypeUnion.Oem.MId OHHPI_MANUFACTURER_ID_MOTOROLA
TypeUnion.Oem.ConfigData
TypeUnion.Oem.Default.MId OHHPI_MANUFACTURER_ID_MOTOROLA