Avalon Firestyles 564 Diamond-Fyre GSR2 Installation - Manual (Page 12)

12 Installation
(for qualified installers only)
© Travis Industries 4140926 100-01395
Fireplace Placement Requirements
 The fireplace requires a 1/2" (13mm) clearance from the angled sides and back of the fireplace to the
framing members. No material (insulation, framing, etc.) may be placed into this area.
 Fireplace must be installed on a level surface capable of supporting the fireplace and vent
 Fireplace must be placed directly on wood or non-combustible surface (not on linoleum or carpet)
 This heater may be placed in a bedroom. Please be aware of the large amount of heat this appliance
produces when determining a location.
Clearances
 When installed, walls in front of the fireplace must be a minimum 1" (25mm) to the side of the
fireplace.
 Due to the high temperature, the heater should be located out of traffic and away from furniture and
draperies.
 Fireplace must be placed so the vents below and above the glass do not become blocked.
Raised Fireplaces
 The fireplace (and hearth, if desired) may be placed on a platform designed to support the fireplace
(155 Lbs.70 Kg) and vent.
 The base of the fireplace must be a minimum 70” (1778mm) below the room ceiling.