Avalon Firestyles 564 Diamond-Fyre GSR2 Installation - Manual (Page 57)

Finalizing the Installation
(for qualified installers only)
57
© Travis Industries 4140926 100-01395
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer’s instructions
supplied with the kit.
Install the conversion kit prior to installing the gas line to ensure proper gas use.
The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance to LP. The
kit contains the stepper motor (regulator) and torx wrench. The burner orifices and burner
gaskets are shipped with the appliance.
1 Remove the glass (see page 47). Remove the crushed glass (if installed - page 52).
2 Remove the cast burner cover and place it aside.
3 Remove the four screws securing the glass tray. Lift the tray up and place it aside.