Finalizing the installation – Avalon Firestyles 564 Diamond-Fyre GSR2 Installation User Manual

Page 53

Advertising
background image

Finalizing the Installation

(for qualified installers only)

53

© Travis Industries

4140926

100-01395

4

Locate the exhaust restrictor on the firebox ceiling. Remove the two screws holding it in place and
place the restrictor aside.

5

Remove the two side fireback clips from the firebox ceiling. They are located at the outward edges of
the firebox near the glass opening.

6

Hold the rear fireback at an angle and position it behind the burner against the back wall of the
firebox. While holding it in place, install the side fireback as shown below.

The side fireback clip

has a keyhole slot. It

can be removed by

loosening the screw

and sliding the clip out.

Advertising