Aviosys 9258DS - Manual (Page 15)

- 15 –
Ref: DS9258Y90M02
If the device is not on the same network a Red Exclamation mark will appear in the IP
Network information section
2.) To setup the device, type in the correct Gateway and IP Address.
* Gateway Address: The gateway address can be obtained in Windows under the network
connections page
* IP Address: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IPEdit and hit the submit button.
4.) Then hit the rescan button on IPEdit to confirm the changes have been made