Aviosys 9258DS - Manual (Page 38)

- 38 –
Ref: DS9258Y90M02
11.) Frequently Asked Questions (F.A.Q)
Q1: How do I reset the device back to manufacturer default values?
Ans: In the front panel of the 9258 DS, there is a reset feature that will reset the device back to
manufacturer default settings. Take a pen or small pin, then press and hold for about 10-15 seconds. Once
you hear a single “beep” sound the device will be reset back to manufacturer default
Default IP: 192.168.1.100 (When 9258 DS is connected to PC directly)
Default Login: Admin
Default Password: 12345678
Q2:
What can I do if I forget my password?
Ans: In the login field enter the field
1.) “super user”: do not enter the quotation marks and there is a space between super and user.
2.) Then do not enter, a password and hit the submit button
3.) Unplug the device and plug it back in.
4.) Then use the default login and password
Default Login: admin
Default Password: 12345678
For security concern , please do power reboot 9258 in 1 minutes after click submit as type " super user "
in the username as login
Q3: What is dual switch technology?
Ans: Dual Switch technology is an additional safety feature of the 9258 DS. Unlike conventional power
distribution units or remote power control units the 9258 DS has a dual switch design which will completely
cut off the power to the devices. Other designs which do not have this feature will may create a harmful
environment that will affect the devices or the things around it. Below is a picture of
Q4: How come I cannot connect to my device from an outside network?
Ans: To use the device outside of LAN (Local Area Network. If a router is present you will have to port
forward the Local IP Address of the 9258 DS so that it could be reached by the outside world. Please refer
to the manual on how to accomplish this task.