Aviosys 9258DS - Manual (Page 17)

- 17 –
Ref: DS9258Y90M02
7.) Hardware Interface
Hardware Reset
To reset the device back to manufacturer default, use a small pen or pin and press the reset button and
hold for a minimum of 10 seconds. Once you hear a “beep” sound the device will be reset.
Serial Port Control
Please view the Controlling the Device section on this manual on page 31.
How to Replace Fuse
1.) The fuse is located between the power switch and the power input plugs.
2.) Carefully remove the fuse holder with a flat screwdriver.
3.) The fuse can be purchased at most electrical stores
Model: U/C GFE 10A 250V (PF)