Baby Lock Evolve (Previous Model) (BLE8W) Instruction and Reference Guide - Manual (Page 21)

T
H
R
E
A
D
I
N
G
19
Threading Your evolve
Locked Position for Threading,
Thread Stand and Thread Port Reference Chart
Your Baby Lock evolve is equipped with an exclusive "Instant Jet-Air Threading System" for fast, easy thread-
ing of the upper, lower, and chain loopers.
One push of the "Jet-Air" threading lever will automatically thread the loopers. It is no longer necessary to use
tweezers for threading the thread guides. If a looper thread breaks or runs out, just re-thread it. There is no
need to follow threading sequence.
1. Open the front cover.
2. Raise the presser foot to release all threads.
3. Set the upper looper positioning lever in the ''UP' position.
4. Depress the machine lock button firmly. Rotate the machine handwheel slowly toward you until the button
"snaps" into the locked position and the lock button release lever moves to the far left (fig.A).
Note: The evolve must be in the locked position when threading the loopers unless otherwise indicated.
The spool pins, tension dials, thread
guides, and threading ports are color
coded for your convenience.
All gold color labels relate to threading
for chain and cover stitches.
All green color labels relate to threading
for overlock stitches.