Baby Lock Evolve (Previous Model) (BLE8W) Instruction and Reference Guide - Manual (Page 41)

O
V
E
R
L
O
C
K
S
T
I
T
C
H
E
S
E
X
P
R
E
S
S
39
Ladder Stitch - Decorative Stitch
NEEDLES
O-1
size 90 Top Stitch
Needle
LENGTH
4.0
WIDTH
7.5
STITCH
SELECTOR
A
WAVE
SELECTOR
O
Set up the machine for 2-thread flatlock - wide but the needle thread-
ing path is different for this technique.
1. Insert a size 90 top stitch needle in left overlock needle position.
2. Lock the machine.
3. Place a heavy decorative thread that will be used in the needle on
"OVERLOCK NEEDLE 1" spool pin and thread the needle thread
through upper looper thread path. (See below illustration.)
4. Unlock the machine, pull the thread out of the upper looper tube
and continue to thread the needle as illustrated.
5. Thread Maxilock thread in the lower looper.
6. Swing the subsidiary looper into place on the upper looper.
7. Place the fabric pieces right sides together for the decorative lad-
der to be on the right side of the fabric.(This can also be done on
the fold as well.)
8. Sew the fabric together and gently pull open; revealing the deco-
rative ladder stitching on the right side of the fabric.
Follow the suggested settings below.
Right
Side
Wrong
Side
Ladder
Right
Side
Wrong
Side