Baby Lock Sashiko 2 (BLQK2) Instruction and Reference Guide - Manual (Page 10)

Turn on the machine
Press the “ l ” symbol on the main power switch located on
the right side of the machine.
The lamp and one of the LED lights will come on when the
machine is turned on.
Turn off the machine
When you are finished using the machine, turn it off. In addi-
tion, before moving the machine to another location, be sure
to turn it off.
1. Make sure the machine is not sewing.
2. Press the “ O” symbol on the main power switch located
on the right side of the machine.
The lamp and LED lights go off when the machine is
turned off.
3. Unplug the power cord from the power cord receptacle.
O
V
E
R
V
I
E
W
9
Turn Machine On/Off
The latch wire is located in the front of the needle which slides in the needle groove in order to
open and close the eye of the needle. The latch wire plays an important role for creating the
stitches. In case of skip stitches or fabric damage, change to a new latch wire (part #BLQK-LW).
Latch Wire
Your Baby Lock Sashiko uses a size 110/18 specialty needle, which is suitable for most fabrics.
Use the Organ brand needles – system QKx1 (part #BLQK-N).
Needle
NOTE: If a power outage occurs while the machine is being operated, turn off the machine and
unplug the power cord.
When restarting the machine, follow the necessary procedure to correctly operate the machine.