Baby Lock Sashiko 2 (BLQK2) Instruction and Reference Guide - Manual (Page 21)

G
E
T
T
I
N
G
R
E
A
D
Y
20
Before removing the bobbin case from the machine the needle should be placed in the up position by
pressing the positioning button, the thread cut, and the fabric removed.
Removing the Bobbin
A
B
C
D
1. Press and hold the positioning button for approximately 2
seconds to set the machine to the bobbin loading position. (Fig. A)
2. Open the side cover of the machine.
3. Grasp the bobbin case by the hinged latch. (Fig. B)
4. Remove the bobbin case with the bobbin from the machine.
(Fig. C)
5. To remove the bobbin from the bobbin case release the hinged
latch of the bobbin case. (Fig. D)
REMINDER: Stitching will not unravel when the thread is cut because
each stitch is locked in place when sewn.