Baby Lock Sashiko 2 (BLQK2) Instruction and Reference Guide - Manual (Page 38)

1. When the side cover is open.
2. When the presser foot is in the raised position.
3. When machine is set to the loading position and
presser foot is in the raised position.
4. When the latch wire is engaged in the release posi-
tion.
5. When the foot control is pressed and the presser foot
is set in the down position and then the machine is
turned on.
NOTE: If none of the LED lights are lit, check to make
sure the bobbin winder shaft has not been accidentally
engaged.
The Sashiko machine is equipped with a stop machine safety system. When the system is activated
by any of the following conditions; the orange LED light will flash on and off and the machine will not
operate, including the foot control.
Safety Devices
A
P
P
E
N
D
I
X
37