BAFO BF-7600 - Manual (Page 23)

17
Wireless 11b PCI Card User’s Guide
4.2.1
>>> 4.2
2. In the list of Available wireless networks, select
(highlight) the network you want, and then click
Connect.
Select
Click
Click
Networking
Since the wireless ad apter is installed in your computer,
you have to configure the settings for communication to
start working in your network environment.
Infrastructure Mode
Infrastructure mode allows your computer to communicate
with the other computers in the network through an Access
Point. The following tasks should be done before you
configure the settings:
- The Access Point must be turned on.
- Your computer with wireless ad
apter installed and
the Access Point must be located with the
communication range of the Access Point (see
the Access Point's manual for details).
Connecting to the Access Point:
1.
Click the Wireless LAN icon to bring up the
Wireless Network Connection window.