BAFO BF-7600 - Manual (Page 27)

21
Wireless 11b PCI Card User’s Guide
Enter a Network
Name (SSID)
IMPORTANT
Check this to enable
Ad-hoc mode.
3. Set up the Network Name (SSID) and Network
Key (if needed) for the network. Then, check
the "This is a computer-to-computer [ad hoc]
network; wireless access points are not used"
option and click OK to enable the Ad-hoc mode.
Click
Click
Check this option
and cancel the
bottom option
2. You can build up the Ad-hoc network by clicking
Add... in the Preferred Networks field.